#24 Access Point and Antenna Placement
Access Point and Antenna placement tips: 1. Always locate access points as close to the users as possible. 2. [...]
#20 Warehouse
Warehouse Design Minimum Primary Signal -67dBm Minimum Secondary Signal -70dBm Signal-to-Noise (SNR) 25dB Frequency Dedicated [...]
#19 Antennas
Number one antenna Rule: Cover what you want and not what you don't want Lamp post example: [...]
#18 Hospitality
Hotel and Dormitory Design Minimum Primary Signal -65dBm Signal-to-Noise (SNR) 25dB AP Placement Inside rooms/dormitories [...]
#17 VoIP Office Capacity
VoIP Capacity Requirements VoIP capacity requirements are normally dictated by the number of simultaneous VoIP calls per AP radio. [...]
#16 SNR & Co-Channel Contention
Signal-to-Noise (SNR) Signal-to-noise (SNR) compares the level of the received signal to the level of background noise and specifies [...]
#15 Secondary Coverage
Secondary coverage is the signal strength from the access point with the second strongest signal. The secondary coverage requirement [...]
#14 Primary Coverage
Primary coverage is the signal strength from the access point with the strongest signal. The primary coverage requirement will [...]
#13 Voice and Video Office Design
Voice and Video Design Minimum Primary Signal -65dBm Minimum Secondary Signal -67dBm Signal-to-Noise (SNR) 25dB [...]
#12 Access Point on Stick (APoS)
Mist APoS configuration When pre-staging your APoS configuration, don't forget to enable "AP Config Persistence" in the site settings [...]
